Available in either 16 or 24 drive bays, accommodating 3Gbps, SATA-2 (3Gbps) drives
Automatic bad sector reassignment
Drive hot-swappable via SCA-II connectors
Dedicated bandwidth to each connected drive
Concurrent I/O commands
Variable stripe size per logical drive
Optimization setting for random or sequential I/Os
External Connections
Two (2) SCSI-320 host channels; transfer rate up to 320MBps per channel
Two (2) DB-9 Connectors for RS232C Serial Port
One (1) RJ45 Ethernet Port
Host Interface
(2) hot-swappable, independent host connection modules
DIP switch settings to change host port attributes
Auto-negotiate FC-AL, point-to-point, or switched fabric
Tagged command queuing up to 256
Variable stripe size per logical drive
Optimization setting for random or sequential I/Os
ASIC400 architecture with hardware RAID6.
Management
Firmware-embedded Java-based GUI RAID manager
Centralized management of multiple arrays over in-band SCSI or Ethernet
Real-time event noti
fi cation over Email, LAN broadcast, or SNMP traps
Host-side SES emulation with pass-through to back-end SES emulation
SNMP 2.0 MIBs with get and set commands
Firmware-embedded utility via LCD keypad or RS-232C port
Controls and Indicators
Front LCD Control Panel for Setup and Con
fi guration
LED Indicators for Power, Battery, Controller(s), and other System Operation Status
Component Failure Indication through LCD, RS-232C, and GUI
Built-In Beeper and Alarm Mute
Dimensions
16-bay dimensions: 5.25” x 19” x 20” , 3U
24-bay dimensions: 19” x6.86”x20.2”, 4U
Environmental
Operating temperature: 5 to 40°C
Non-operating temperature: - 40º to 60ºC
Relative humidity: 10~95%, non-condensing
Operating altitude: sea level to 10,000ft
Power and Cooling
Two (2) Hot Swap Redundant 530W Power Supply Units
Two (2) Separate Hot Swap Redundant Cooling Modules w/ (2) Individual Fans
Input: 90-260VAC, 47-63Hz
Output: @5V (25A max), 12V (32A max), 3.3V (20A max)